Combat mold and algae

Apply ProfiTreat ALG to a surface, contaminated with mold and algae, using a soft brush, trigger pump, sponge or paint roller. The cleaning agent takes effect shortly after application. Repeat the procedure 60 minutes after initial application to achieve maximum efficiency. ProfiTreat ALG will completely eliminate mold and algae and prevent their re-development. Use undiluted cleaner, below 200 ml/m2, according to the level of contamination.

Quick tip: Use the agent in a well ventilated area and avoid prolonged breathing of vapor. To minimize mold exposure or potential health risk, it is advisable to wear protective equipment.


 

Professionally clean awnings, tents and tarpaulins

Combine water with a proper amount of ProfiTreat CNV professional canvas cleaner (10 - 100 ml/l, according to the level of dirtiness) in a spray bottle. Apply the solution to the surface and allow a few minutes to act. Clean the surface using a brush or a broom and rinse thoroughly with plenty of water. For best results, we recommend using a pressure cleaner and water temperature between 40 and 50°C. Allow the surface to dry completely.

Quick tip: Avoid cleaning during hot and sunny weather, as the cleaner vapors and dries too fast at higher temperatures.


 

Restore Shine to stainless steel

Apply a few drops of ProfiTreat INX on a stainless steel surface and clean it using a damp cloth. Rinse thoroughly and wipe dry with a paper towel or cloth to prevent water spots. ProfiTreat INX effectively cleans and protects stainless steel, chromium, nickel and ceramics in hotels, restaurants and food industry. Completely removes limescale, grease and smudges, protects the surfaces and ensures less frequent and easier cleaning.

Quick tip: A small amount of cleaner is sufficient, greater quantities are difficult to rinse off the surface.


 

Easiest way to clean Barbecue grills and ovens

Best way to clean stoves, ovens, baking tins, barbecue grills and steamers is to use ProfiTreat BBQ specialty cleaner. Spray undiluted agent directly on surface to be cleaned and allow 10 - 15 minutes to act. Use a sponge to remove grime and thoroughly clean the area with a damp cloth and tap water. Repeat the procedure in case of tough burnt stains, and allow the cleaner to perform longer. Avoid using the product on polished surfaces, plastic, aluminum or zinc, and self-cleaning ovens. Make sure the surface is cool before applying the cleaner.

Quick tip: Test on a small hidden area before use. Lightly scrub away any larger particles of dirt and gung before applying ProfiTreat BBQ.


 

Keep your stone monuments and tile spotless

For smooth or polished stone, use ProfiTreat STN to prepare a cleaning solution with a dilution ratio of 1:10. Use a trigger bottle to spray the solution directly to the surface, gently scrub with a sponge or brush and clean thoroughly with a damp cloth. Wipe dry with a paper towel to get a natural shine.
Rough materials, such as concrete or natural stone should be cleaned with undiluted agent. Spray directly to the surface, allow several minutes to act, scrub away the dirt and rinse with small amount of water. Repeat the procedure in case of tough buildups. The cleaner should not come into contact with plants.

Quick tip: Avoid cleaning during hot weather due to faster evaporation.


 

Remove stubborn dirt from fireplaces

ProfiTreat FPL effectively removes sooth and grease around fireplaces, bread ovens, fireplace inserts and fireplace glass doors and restores their original shine. Spray undiluted cleaner onto the surface and let it soak for 15 minutes. Wipe it off with a damp cloth and warm water. Repeat the procedure if tough stains are not removed. Make sure the surface is cool before applying the cleaner. Avoid using the product on polished surfaces, plastic, aluminum or zinc.

Quick tip: Use a scoop or brush to scrub away larger burnt-on particles before applying the cleaner. Test a small hidden area prior to application.